蓝鲸体育直播

Gas Leakage Detection for Various Facilities

For steel manufacturing, chemical, petrochemical plants etc.

Preventing accidents caused by gas leakage is a significant challenge in various production facilities and plants, such as steel manufacturing mills, chemical, petrochemical and other types of facilities. This challenge arises due to the aging of facilities and a decrease in experienced personnel capable of providing safety guidance.

It is of utmost importance to proactively prevent accidents for the well-being and safety of workers, safety of the surrounding environment and residents, and the stable operations of the plant.

For facility managers who wants to

Preform safety inspection before entering the facility site
Continuously monitor a wide area where leaked gas tends to retain
Confirm if there is any new hazardous areas due to changes in site environment or process conditions

Solution from 蓝鲸体育直播

Features of 蓝鲸体育直播's Analyzers for Leakage Detection

鈻� One analyzer for monitoring multiple sampling points over a wide area

The switching of multiple sampling points enables the measurement of a wide area with a single analyzer.

鈻� Excellent maintainability

Compared to installing many simple sensors, our solution involves only one analyzer. This allows maintenance in a single location, contributing to a reduction of maintenance cost and increased work efficiency.

The analyzer equipped with automatic calibration function that facilitates daily maintenance.

鈻� Accurate measurement of gas components across wide range, even at low concentrations

Due to 蓝鲸体育直播's original Cross-Modulation NDIR technology (refer to Fig. 2) adopted to the ENDA-5000 analyzer, it is capable of performing stable and accurate measurements and detecting concentration changes even at low parts per million levels.

Figure 1: Gas leakage detection for accident prevention

Figure 2: Detector design of Cross-Modulation NDIR

Lineup of Analyzers for Gas Leakage Detection

We propose the appropriate equipment depending on the site environment, measurement components, and other circumstances.

Stack Gas Analyzer ENDA-5000 Series

Analyzers with excellent long-term stability

Multi-Component Gas Analyzer VA-5000 Series

Capable of simultaneous measurement of 3 sampling points by 1 unit

Explosion-proof Gas Analyzer 51 Series

Explosion proof design for application at petrochemical plant etc.

Applications

Special gas such as PFAS* leak detection from chemical plants

_{*Per- and Polyfluoroalkyl Substances}

Detection of carbon monoxide (CO) and other toxic gas leaks from each facility such as steel production
Detection of toxic gases which required to be monitored under TLV-TWA etc. to comply with occupational exposure standard for safety purpose
Detection of leaks for hydrocarbon (HC) combustible gases, including city gas, etc.
Greenhouse Gases (CH₄, CO₂, N₂O) leak monitoring

Figure 3. Analyzer for gas leakage detection

Measurement Component

Gas component	Min. measurement range	Zero drift / Span drift	Repeatability
Carbon Monoxide锛圕O锛�	0-200 ppm	贵厂卤2%/飞别别办	贵厂卤0.5%
Carbon Dioxide锛圕O₂锛�	0-100 ppm	贵厂卤2%/飞别别办	贵厂卤0.5%
惭别迟丑补苍别锛圕贬₄锛�	0-200 ppm	贵厂卤2%/飞别别办	贵厂卤0.5%
笔谤辞辫补苍别锛圕₃H₈锛�	0-100 ppm	贵厂卤2%/飞别别办	贵厂卤1.0%
Nitric Oxide锛圢O锛�	0-200 ppm	贵厂卤2%/飞别别办	贵厂卤0.5%
Sulfur Dioxide锛圫O₂锛�	0-200 ppm	贵厂卤2%/飞别别办	贵厂卤0.5%
Per- and Polyfluoroalkyl Substances (PFAS)	0-10 ppm	贵厂卤4%/诲补测	贵厂卤1.0%