On-board Emissions Measurement System
OBS-ONE is the latest Portable Emissions Measurement System designed for engine/vehicle certification under real road conditions.
It measures concentrations of emissions (CO, CO2, THC, NOx, NO2), particulate matter, air-to-fuel ratio, exhaust flow rate, GPS data, environmental conditions (atmospheric temperature, humidity and pressure) and calculates mass emissions.
OBS-ONE features the highly adaptable, intelligent operating platform called 鈥溊毒ㄌ逵辈� ONE PLATFORM鈥� which integrates other ONE series product data and optimizes test cell operation.
蓝鲸体育直播 has developed broad emission test applications for certification and engine/vehicle R&D, such as simulating a real-world driving event in the test cell with the Test Automation System-STARS. This simulation requires data combined from the OBS-ONE and a drive recorder.
鈼� Easy to Install
鈼� Stable Operation Over Long Driving Periods
鈼� Safe
鈼� Accurate
鈼� Measurement
Comprehensive test package includes self-diagnosis, quality check, and sensitivity calibration before testing.
Guides the entire process (preparation, measurement data post processing, etc.) from before to after testing.
[ Real-time Validation and Guidance ]
銉籆hecks measuring data during testing to avoid invalid results
銉籇river can concentrate on driving without any operation once measurement is started
鈼� Data Post Processing
Complicated process of calculation and analysis made simple
銉籗uitable calculation and result output for LDV/HDV
銉籑akes test report for certification
銉籗hows the camera-recorded drive replay and the GPS map related to measured data
銉籆omplies with ASAM-ODS* standard
鈥籄SAM-ODS: Association for Standardization of Automation and Measuring Systems 锝� Open Data Service
Integrated Operation Software 鈥溊毒ㄌ逵辈� ONE PLATFORM鈥�The newly developed software for the OBS-ONE is integrated with the same operating platform as the MEXA-ONE, CVS-ONE and other devices. The intuitive, ergonomic design of the new software platform makes system operation easier. System control and a complete system view of other measurement devices are available from one single display. User support for system operation such as maintenance, alarms, and message functions has been further enhanced.
銉籉uture expandability of PN counting and additional pollutant measurement, etc.
銉籙ser-friendly screen configuration and layout offer both measurement efficiency and convenience
Achieving real-world simulation in the test lab
OBS-ONE provides real driving emission test as well as real driving simulation in the test lab by utilizing STARS.
This comprehensive solution ensures accurate emissions data from both real-road and laboratory testing conditions.
| LDV Type | HDV Type | |||
|---|---|---|---|---|
| OBS-ONE -GS01 | OBS-ONE -GS02 | OBS-ONE -GS11 | OBS-ONE -GS12 | |
| CO | 鈼� | 鈼� | 鈼� | 鈼� |
| CO2 | 鈼� | 鈼� | 鈼� | 鈼� |
| NO/NOx *1 | 鈼� | - | 鈼� | - |
| NO, NOx, NO2*2 | - | 鈼� | - | 鈼� |
| THC | - | - | 鈼� | 鈼� |
| Exhaust Flow Rate | 鈼� | 鈼� | 鈼� | 鈼� |
| Power Requirements | DC 22銆�28 V | |||
| Power Consumption (at stable state) *3 | Approx. 0.2 kW | Approx. 0.45 kW | ||
| Dimensions *4 | Approx. W 350 脳 D 470 脳 H 330 mm | Approx. W 350 脳 D 470 脳 H 470 mm | ||
| Weight (Main unit) | Approx. 32 kg | Approx. 45 kg | ||
| Battery *5 | Deep-cycle, sealed lead battery of DC 24 V 35 Ah (5 hour rate), Operation time 锛� Approx. 3 hours | Deep-cycle, sealed lead battery of DC 24 V 100 Ah (5 hour rate), Operation time 锛� Approx. 4.5 hours | ||
| Operating Conditions | Temperature锛� -10 to 40 deg.C,*6銆�Relative humidity锛� less than 80%, Altitude锛� 0 to 2000 m above sea level | |||
鈽匩DIR 锛� Non Dispersive Infrared Detection
銆�CLD 锛� Chemiluminescence Detection
銆�FID 锛� Flame Ionization Detection
| Measurement Principle鈽� | Measurement Range | |
|---|---|---|
| CO | Heated NDIR | 0-0.5 to 0-10 vol% |
| CO2 | Heated NDIR | 0-5 to 0-20 vol% |
| NO/NOx | Heated CLD | 0-100 to 0-3000 ppm |
| NO, NOx, NO2 | Heated-dual CLD | 0-100 to 0-3000 ppm |
| THC | Heated FID | 0-100 to 0-10000 ppmC |
| Sampling Method | Wet measurement | - |
| Exhaust Fow Rate*7 | Pitot flow meter | 0-2.0 to 0-65.0 m3/min |
| Standard Signal Measurements | Exhaust temperature, Exhaust pressure, Atmospheric pressure, Atmospheric temperature, Atmospheric humidity, GPS signal, Speed | |
*1 NO/NOx: Switchable measurement
*2 NO, NOx: Simultaneous measurement NO2: Calculation of NO and NOx
*3 Length of heated inlet tube LDV type: 2 m, HDV type: 5 m, Atmospheric temperature: 20 deg.C
*4 Excluding handle and projection
*5 Nickel hydride battery is an optional unit.
*6 Please contact 蓝鲸体育直播 if temperature is below 0 deg.C
*7 Exhaust flow rate can be taken by OBD interface unit
锛淥辫迟颈辞苍锛�
銉籓BD interface unit锛� Supported ISO15765-4/J1939
銉籈xternal input unit (EIU)锛� Analog voltage, Analog current, Thermocouple, Platinum resistance temperature detector, Frequency
銉籔ower supply unit (PS)锛� Power supplied from AC to system
銉籔ower exchange unit (PE)锛� Can be changed power supply without being powered off
銉籋eated bubbler unit: Humidifying unit for H2O interference check and H2O quenching effect check
Do you have any questions or requests? Use this form to contact our specialists.
Protection Case for Testing Heavy-Duty and Non-Road Mobile Machinery
Constant Volume Sampler
FTIR Exhaust Gas Analyzer Dilute Measurement Type
FTIR Exhaust Gas Analyzer Direct Measurement Type
Micro Dilution Tunnel
Dynamic Altitude Simulation
Altitude Simulator
Altitude Simulation
Motor Exhaust Gas Analyzer
Solid Particle Counting System
Motor Exhaust Gas Analyzer
Laser Spectroscopic Motor Exhaust Gas Analyzer
Compact Emissions Measurement System
On-board Emissions Measurement System
On-board Emissions Measurement System
Protection Case for Testing Heavy-Duty and Non-Road Mobile Machinery
On-board SPN10 measurement for real-world
On-board NH3/N2O Measurement System for real-world driving
Pitot Tube Exhaust Flow Meter
Dual Pitot Tube Exhaust Flow Meter
Road-to-Rig Chassis Dyno Replication
Explosion-proof Gas Analyzer
Air Pollution Monitor
Ambient Carbon Dioxide Monitor
Hydrocarbon Monitor / THC Analyser
Ambient Carbon Monoxide Monitor
Ambient NOx Monitor
Ambient Ammonia Monitor
Ambient Ozone Monitor
Ambient Sulfur Dioxide Monitor
Ambient Hydrogen Sulfide Monitor
Ambient Air Quality Monitoring System
Continuous Emission Monitoring System
Stack Gas Analysis System
FTIR Exhaust Gas Analyzer Dilute Measurement Type
FTIR Exhaust Gas Analyzer Direct Measurement Type
Trace Gas Monitor
Stack Gas Analyzer
Vapor Concentration Monitor
High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring
Heated Type NOx Analyzer
Heated Type THC Analyzer
Motor Exhaust Gas Sulfur Analyzer
Motor Exhaust Gas Analyzer
Automotive Emission Analyzer
FTIR Motor Exhaust Gas Analyzer
Laser Spectroscopic Motor Exhaust Gas Analyzer
On-board NH3/N2O Measurement System for real-world driving
Portable Gas Analyzer
Process Analyzer System
Tunable Laser Gas Analyzer
Multi-Component Gas Analyzer
Explosion-proof Gas Analyzer
Air Pollution Monitor
Air Quality Monitor
Ambient Carbon Dioxide Monitor
Ambient Carbon Monoxide Monitor
Ambient NOx Monitor
Ambient Ammonia Monitor
OEM gas (CO/HC) analyzer
OEM gas (NO) analyzer
Continuous Emission Monitoring System
Hydrogen Analyzer
Oxygen/Nitrogen/Hydrogen Analyzer
(Flagship High-Accuracy Model)
Oxygen/Nitrogen Analyzer (Entry Model)
Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)
Carbon/Sulfur Analyzer (Entry Model)
Carbon/Sulfur Analyzer (Tubular Electric Resistance Heating Furnace Model)
Stack Gas Analysis System
Stack Gas Analyzer
Trace Gas Monitor
Stack Gas Analyzer
Vapor Concentration Monitor
High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring
Laser scanning oil film detector
Motor Exhaust Gas Analyzer
Automotive Emission Analyzer
On-board NH3/N2O Measurement System for real-world driving
Oil content analyzer
Oil content analyzer
Portable Gas Analyzer
Hydrogen Gas Analyzer
Tunable Laser Gas Analyzer
Multi-Component Gas Analyzer
